62 | DR 100e (Film/CR) | Basic Workflow
Stopping the device
1. Bring the device to transport position.
2. Press the power off button.
Figure 25: Power off
3. Unplug the power supply cable.
4. Wind the mains cable on the cable reel.
5. Move the device to the location where a next exposure is planned or to a
suitable place for parking.
0360B EN 20181015 0853
CAUTION:
Risk of damaging the device. Always grip the plug to disconnect
the power cable. Don't disconnect the plug by pulling the cable.
Handle connectors with care.