AGFA DR 100e User Manual page 49

DR 100e (Film/CR) | Safety Directions | 49
WARNING:
Do not connect the equipment with anything other than
specified. Doing so may result in fire or electric shock.
WARNING:
To avoid risk of electric shock, do not remove any covers.
Changes, additions, maintenance or repairs must be carried out
by an Agfa certified field service engineer.
WARNING:
Do not remove protections or cables from the device, unless it is
expressly required in this User Manual, because inside are
dangerous electrical voltages. The removal of protections or
cables can cause mortal injuries or serious damages to the
people.
WARNING:
The device includes moving parts. The removal of protections
can cause serious or mortal physical injuries to people.
WARNING:
Do not block the ventilation ports to prevent overheating.
Overheating can cause system malfunction and damages.
WARNING:
Always double check your exposure parameter settings prior to
exposing the patient.
CAUTION:
Excessive ambient temperature may impact the performance
and cause permanent damage to the device. If ambient
temperature and humidity is outside the range of 10 - 40 °C and
30 - 75% RH, do not operate the system or use air conditioning.
Warranty will be void if it is obvious that operating conditions
are not met.
CAUTION:
Laser radiation is potentially dangerous for skin and eyes. Do
not stare directly or through optical instruments at the laser
beam. Do not point the laser beam on the face or the eyes of the
patient.
CAUTION:
Strictly observe all warnings, cautions, notes and safety
markings within this document and on the product.
0360B EN 20181015 0853