X-Ray Generator Control Panel - AGFA DR 100e User Manual

X-ray generator control panel

1
15
14
13
12
11
Mains power indicator light.
1.
The indicator lights up when the device is connected to the mains and
powered.
Turn the device on.
2.
Control panel display for device status, X-ray parameters and messages.
3.
The indicator lights up when the device is ready for exposure.
4.
The indicator lights up when exposure is ongoing.
5.
Reset the alarm.
6.
Return to the upper menu.
Function buttons for selecting a line on the display.
7.
Modify the exposure settings for mAs.
8.
Modify the exposure settings for kV.
9.
Open the list of anatomical programs.
10.
Scroll down.
Activate remote control.
11.
The indicator lights up when the remote control is enabled.
Small focus and large focus.
12.
The indicator light shows the active setting.
Moving grid.
13.
The indicator lights up when the signal for the moving grid is enabled.
Collimator light.
14.
After pressing the button, the light field indicating the collimated area and
the laser light indicating the center position remain lit for a few seconds
before automatically switching off.
Turn the device off.
15.
2 3 4
10 9
DR 100e (Film/CR) | Introduction | 19
5
8
6
7
0360B EN 20181015 0853