Stopping The Dr Detector - AGFA DX-D 40C User Manual

Stopping the DR Detector

To stop the DR Detector:
1. Turn off the detector.
Press and hold the power button (approx. 3 seconds).
All the status indicator lights are off.
2. While holding down the battery pack, slide the lock levers toward
(unlock) (1), put your fingers on the battery edge that lifts up, and then
pull the edge to remove the battery pack (2).
1
Figure 11: Remove the battery
2
1
Note: When the detector will not be used for some time, remove
the battery. Otherwise, overdischarge may occur, leading to a
shorter battery life.
Note: When not in use, keep the detector, handle unit with grid
in a designated location or in a location where they are safe
and cannot fall down.
DX-D 40C, DX-D 40G | Getting started | 69
0290A EN 20140626 1622