CR 30-X S
YSTEM
Stopping the CR 30-X System
To stop the CR 30-X System:
1
Switch off the CR 30-X by pressing the main switch.
For detailed information, refer to the CR 30-X User Manual, document 2386.
2
Stop NX.
NX can be stopped in two ways:, either by logging out of Windows or by using the Exit
NX action button.
For detailed information about stopping NX, refer to the NX User Manual, document
4420.
3
Turn off the UPS (optional accessory) to disconnect the control PC and the
CR 30-X.
Press and hold the Off button until the long beep ceases (approximately five seconds).
18
Getting Started with the CR 30-X System
Note: Step 3 is only applicable if your CR 30-X System is extended with an
uninterruptible power supply (UPS).
2385A EN 20060630