66 | DR 100e (Film/CR) | Advanced Operation
Printing the DAP values
Using the optional DAP meter and DAP value printer, the data concerning the
dose to which a patient has been exposed, can be printed on a self-adhesive
label and attached to the film.
1. Before starting the examination of a patient, reset the DAP meter by
pressing the F1 and reset button simultaneously.
Figure 31: Reset the DAP meter
2. Perform the examination by performing all exposures for the patient.
3. Press the F4 button to print the DAP value.
Figure 32: Print DAP value
The printer produces a label containing the date and time of the
examination and the measured DAP value.
Replacing the roll of paper
1. Open the printer cover using the slabs on the side.
2. Insert the roll of paper.
0360B EN 20181015 0853