Setting The Exposure Parameters On The X-Ray Generator Control Panel - AGFA DR 100e User Manual

Setting the exposure parameters on the X-ray
generator control panel
1. Set the exposure parameters for an anatomic program.
For making a free exposure, continue with the next step, adjusting the
exposure parameters.
a) Press the button to open the list of anatomic programs.
Figure 15: Anatomic programs
An anatomic group is displayed on the first line of the display, with the
anatomic programs listed below.
b) To switch to another anatomic group, press the F1 button on the
console repeatedly.
Figure 16: Select anatomic group
c) To scroll down the list of anatomic programs, press the button to scroll
pages.
Figure 17: Scroll pages
d) Select an anatomic program by pressing the F2, F3 or F4 buttons,
corresponding to the line on the display containing the selected
program.
Figure 18: Select anatomic program
The selected anatomic group, anatomic program and exposure
parameters are displayed. The exposure parameters can still be
adjusted.
DR 100e (Film/CR) | Basic Workflow | 57
0360B EN 20181015 0853