2. Place the WLAN card bracket to secure the WLAN antenna cables.
3. Insert the WLAN card into the connector on the system board.
4. Slide the wireless card at an angle into the wireless-card slot.
5. Replace the screw (M2x3) to secure the plastic tab to the WLAN card.
Next steps
1. Install the
hard-drive and optical-drive
2. Install the
3.5-inch
hard-drive.
3. Install the
2.5-inch
hard-drive.
4. Install the
front
bezel.
5. Install the
side
cover.
6. Follow the procedure in
WLAN antenna
Removing the WLAN antenna
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
2.5-inch
5. Remove the
3.5-inch
6. Remove the
hard-drive and optical-drive
7. Remove the
WLAN
card.
34
Removing and installing components
cage.
after working inside your
before working inside your
hard-drive.
hard-drive.
cage.
computer.
computer.
Need help?
Do you have a question about the Precision 3460 Small Form Factor and is the answer not in the manual?
Questions and answers