Next steps
1. Install the
hard-drive and optical-drive
2. Install the
3.5-inch
hard-drive.
3. Install the
2.5-inch
hard-drive.
4. Install the
front
bezel.
5. Install the
side
cover.
6. Follow the procedure in
WLAN antenna
Removing the internal WLAN antenna
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
2.5-inch
5. Remove the
3.5-inch
6. Remove the
hard-drive and optical-drive
7. Remove the
WLAN
card.
About this task
The following images indicate the location of the internal WLAN antenna and provide a visual representation of the removal
procedure.
Steps
1. Remove the antenna cables from the routing guides on the chassis.
50
Removing and installing components
cage.
after working inside your
before working inside your
hard-drive.
hard-drive.
cage.
computer.
computer.
Need help?
Do you have a question about the OptiPlex 5000 Small Form Factor and is the answer not in the manual?
Questions and answers