Menu Options - Toshiba B-SX600 SERIES Owner's Manual

8.4 Menu Options

If the [Menu] key is pressed while "Ready" or "Pause" is being shown, the Menu will appear on the
LCD.
Ready
No. 00000
Power Ready
Pause
Cancel
Enter
■ Menu Options
Menu options
Information
Clear Trip Meter
Test Print
Reprint Error Page
TOF After Booting
Low Power Mode
Lower Power (min)
Beep Volume
Beep Pattern
LCD Contrast
Error Data
Feed
Menu
Product information (e.g. firmware version) is displayed.
A TRIP value (running distance) in the product information can be
cleared.
A print test can be performed with the Operation Panel.
(→ See Section 9. TEST PRINT.)
If an error occurs while printing, whether to print the erroneous page
again or not can be specified.
Whether to perform the page alignment after power-on or not can be
specified.
Whether to enable or disable Low Power Mode can be specified.
A time period until the printer goes into Low Power Mode can be
specified.
A Beep Volume can be adjusted.
A time period during which the buzzer sounds can be specified.
The contrast of the LCD can be adjusted.
Information
Clear Trip Meter
Test Print
Power
Pause
Enter
Overview
8- 7
8. OPERATION PANEL
<Menu>
Ready Error Data
Feed
Menu
Cancel