Printer Operation Using The Operation Panel - Toshiba B-SX600 SERIES Owner's Manual

8.3 Printer Operation using the Operation Panel

The printer can be operated from the Operation Panel.
Operation
Switching the printer between
pause mode and ready mode
Feeding a single page or label
Stopping the buzzer sound
Clearing print data stored in
the printer
Switching the message from
"Error" to "Pause" on the LCD
Enabling or
[Menu] key
Displaying the Menu options
Cutting the media
(Only for the model with the
Cutter Unit)
Press the [Pause] key.
Press the [Feed] key.
(The media is fed continuously while the [Feed] key is being
held down.)
Press any of the keys on the Operation Panel.
Hold down the [Cancel] key until the Data LED goes out.
(After clearing print data, make sure that the Data LED is off
before initiating a print job.)
Press the [Cancel] key.
disabling the Hold down the [Menu] key.
Press the [Menu] key.
(Enable the [Menu] button if disabled. Then press it again.)
(→ See section 8.4 Menu Options.)
Hold down the [▼] key.
Operational procedures
8- 6
8. OPERATION PANEL