Label With Black Marks - Toshiba B-SX600 SERIES Owner's Manual

3.4 Label with black marks

"Label with black marks" refers to a label stock with black marks printed at the back of the
backing paper for the position detection purpose, as illustrated below. When a label stock with
black marks is loaded, the Reflective Media Sensor is used.
Black mark on the
reverse side
Reflective Media Sensor
(Located under the media)
15 to 120 mm
12 mm or over
Media feed direction
2 to 13 mm
3- 4
3. MEDIA AND RIBBON
Label pitch
10 to 1,000 mm
Page start line