Printer Setup; Removing The Protective Materials - Toshiba B-SX600 SERIES Owner's Manual

2. PRINTER SETUP

2.1 Removing the Protective Materials

CAUTION
Precautions
•
Do not plug in the Power Cord until the printer is set up completely.
1. Hold the Side Cover Grip and open the Side Cover completely.
2. Push up the Upper Unit Unlock Lever (underneath the Upper Unit Handle) to unlock the Upper
Unit.
3. Hold and lift the Upper Unit Handle until it is locked.
Upper Unit Unlock Lever
Please be careful not to get your fingers caught in the covers while opening
or closing them. This may cause injuries.
Side Cover Grip
Upper Unit Handle
2- 1