Loading The Media; How To Load The Media - Toshiba B-SX600 SERIES Owner's Manual

5. LOADING THE MEDIA

This section describes how to load the media.
Before using the Peel-off Unit or fanfold paper, please read Section 5.1 How to Load the Media
carefully first. Then, refer to section 5.2 How to Load the Paper for the Model with the Peel-off
Unit or section 5.3 How to Load Fanfold Paper.
1. Do not touch any moving parts. To reduce the risk of fingers, jewellery, clothing, etc., being
drawn into the moving parts, be sure to load the media once the printer has stopped moving
completely.
2. The Print Head becomes hot immediately after printing. Allow it to cool before loading the
media.
3. Care must be taken not to catch your fingers in the covers when opening or closing them.
NOTE:
For the specification of available media, refer to Section 3.1 Supply Specifications.

5.1 How to Load the Media

1. Open the Side Cover completely.
2. Push up the Upper Unit Unlock Lever to
unlock the Upper Unit.
Upper Unit Handle until it is locked.
3. While squeezing the Unlock Levers of the
Media Roll Holder, slide the Media Roll Holder
outside.
WARNING!
Hold and lift the
Upper Unit
Media Roll Holder
5- 1
Upper Unit
Unlock Lever
Unlock Lever