2.4
Installation under Windows 2000 (USB with Plug & Play
Enabled)
Note: Proper operation is not guaranteed on the PC running Windows 2000.
1.
Turn on the PC.
Note: Log on as the user with administrative privilege.
2.
Turn on the printer and connect it to the PC with a USB
cable.
3.
"USB DEVICE" is detected and "USB Print support" is
automatically installed.
4.
After a while, the "Found New Hardware Wizard" is
displayed. Click the [Next] button.
5.
Select the "Search for a suitable driver for my
device (recommended)", and click the [Next]
button.
6.
Check the "Specify a location" checkbox, then
click the [Next] button.
- 33 -