Printer Setup - Toshiba B-EX4T2 SERIES Owner's Manual

2. PRINTER SETUP

2. PRINTER SETUP
This section outlines the procedures to setup your printer prior to its operation. The section includes precautions,
loading media and ribbon, connecting cables, setting the operating environment of the printer and performing an
online print test.
Setup Flow
Installation
Connecting the power cord
Loading the media
Media sensor position
alignment
Loading the ribbon
Connecting to a host computer
Turning the power ON
Printer setting
Installing the printer driver
Print test
Position and Print Tone Fine
adjustment
Automatic threshold setting
Manual threshold setting
Procedure
After referring to the Safety Precautions in this
manual, install the printer in a safe and stable
location.
Connect a power cord to the power inlet of the
printer, then to an AC outlet.
Load a label stock or tag stock.
Adjust the position of feed gap sensor or black
mark sensor according to the media being used.
If using thermal transfer media then load the
ribbon.
Connect the printer to a host computer or
network.
Turn on the printer power.
Set the printer parameters in the system mode.
If necessary, install the printer driver on your
host computer.
Make a print test from your operating
environment and check the print result.
If necessary, fine adjust the print start position,
cut/strip position, print tone, etc.
If the print start position cannot be detected
properly when pre-printed label are used, set the
threshold automatically.
If the print start position cannot be detected
properly even after automatic threshold setting is
performed manually set the threshold.
E2- 1
ENGLISH VERSION EO1-33094
2. PRINTER SETUP
Reference
2.1 Installation
2.2 Connecting the Power
Cord
2.3.1 Loading the Media
2.3.1 Loading the Media
2.3.2 Loading the Ribbon
2.4 Connecting the Cables to
Your Printer
2.5 Turning the Printer
ON/OFF
2.6 Printer Setting
2.7 Installing the Printer
Drivers
2.8 Print Test
2.9 Position and Print Tone
Fine Adjustment
2.10 Threshold Setting
2.10 Threshold Setting