Printer Setup - Toshiba B-EX4T2 Series Manual

1. PRODUCT OVERVIEW
1.6 Option
Option Name
Disc cutter module
Strip module
203-dpi print head
300-dpi print head
600-dpi print head
RTC & USB host
interface card
Expansion I/O
interface card
Parallel interface
card
Serial interface card
Wireless LAN
interface card
NOTE1
To purchase the optional kits, please contact the nearest authorised TOSHIBA TEC representative or
TOSHIBA TEC Head Quarters.
Type
B-EX204-QM-R
B-EX904-H-QM-R
B-EX704-TPH2-QM-R
B-EX704-TPH3-QM-R
B-EX704-TPH6-QM-R
B-EX700-RTC-QM-R
B-EX700-IO-QM-R
B-EX700-CEN-QM-R
B-EX700-RS-QM-R
B-EX700-WLAN-QM-R
B-EX700-WLAN3-QM-S
Description
Disc cutter
Each time media is cut, the media feed is
stopped.
This allows use of on-demand (peel-off)
operation or to take-up labels and backing
paper together when using the rewind
guide plate. To purchase the strip module,
please inquire with your local distributor.
This print head enables a conversion of a
300dpi print head of the B-EX4T2-TS
model into 203dpi print head.
This print head enables a conversion of a
203dpi print head of the B-EX4T2-GS
model into 300dpi print head.
Only with B-EX4T2-HS Model
Note: 600-dpi print head is only with B-
EX4T2-HS Model.
This card holds the current time: year,
month, day, hour, minute, second and
provides a USB host interface.
Installing this card in the printer allows
connection to an external device with the
exclusive interface.
Installing this card provides a Centronics
interface port.
Installing this card provides an RS-232C
interface port.
Installing this card provides Wireless LAN
communication.
5