Lantronix SecureLinx SLC8 User Manual page 98

2. In the lower section of the page, enter the following:
Note:
Host List Id (view
only)
Host List Name
Retry Count
Authentication
3. You have the following options:
Host Parameters
Host
Protocol
Port
SecureLinx SLC User Guide
To clear fields in the lower part of the page, click the Clear Host List button.
Displays after a host list is saved.
Enter a name for the host list.
Enter the number of times the SLC should attempt to retry
connecting to the host list.
Select to require authentication when the SLC connects to
a host.
To save the host list without adding hosts at this time, click the Add Host List
button.
To add host lists, enter the following:
Name or IP address of the host.
Protocol for connecting to the host (TCP, SSH, or Telnet).
Port on the host to connect to.
8: Devices
98