Chapter 6 Configure The Voip; Check The Status Of Voip; Configure The Sip Accounts; Figure 6-1 Voip Status Page - Zte ZXHN H268A Maintenance Management Manual

Chapter 6
Configure the VoIP
Table of Contents

Check the Status of VoIP............................................................................................6-1

Configure the SIP Accounts........................................................................................6-1

Configure the Advanced Parameters of VoIP..............................................................6-2
Configure the VoIP Service ........................................................................................6-4
Configure the SIP Protocol .........................................................................................6-4
Configure the Media ..................................................................................................6-6
Configure the Fax ......................................................................................................6-6
6.1 Check the Status of VoIP
This procedure shows the relevant information of
Steps
Check the status of VoIP
1. Select VoIP > Status. The Status page is displayed, as shown in

Figure 6-1 VoIP Status Page

2. Click Refresh to refresh the information.
Check the call log
3. Click the Call Log, and then click the Refresh to refresh the information.
- End of Steps -
6.2 Configure the SIP Accounts
This procedure describes how to configure basic parameters of the VoIP service, including
sip account, authorization username, password.
SJ-20150916162339-007|2017-02-16 (R1.0)
VoIP status.
6-1
ZTE Proprietary and Confidential
Figure 6-1.