Login - Zte ZXHN H3601 Maintenance Management Manual

ZXHN H3601 Maintenance Management Guide
2. On the local computer, double-click Local Area Connection and click Properties.
The Local Area Connection Properties dialog box is displayed.
3. Double-click Internet Protocol (TCP/IP). The Internet Protocol (TCP/IP)
Properties dialog box is displayed. Set the IP address to 192.168.1.200, subnet
mask to 255.255.255.0, and default gateway to 192.168.1.1.
4. Click OK.
Postrequisite
After the IP address of the computer is set, you can run the Ping command to ping the
IP address 192.168.1.1. If the ping operation is successful, it indicates that the TCP/IP
configuration is correct and the computer is properly connected to the ZXHN H3601.

4.2 Login

The ZXHN H3601 provides a Web-based configuration and management system. You
can enter a specified IP address in the address bar of Internet explorer to access the
system.
Prerequisite
A computer is directly connected to the ZXHN H3601, and their IP addresses are in the
same network segment.
Steps
1. Open Internet explorer, and enter http://192.168.1.1 (default maintenance IP address
of the ZXHN H3601) in the address field. Press the Enter key. The login page is
displayed, see
Figure 4-1 Login Page
4-2
Figure 4-1.
SJ-20200429083356-004 | 2020-07-23(R1.0)