Table of Contents
Advertisement
3.3
Initial Setup
This section shows you how to set your system according to the sensors you have
connected.
Note: Some units are set to metric in this section, actual setting ranges vary
depending on the unit of measurement set in the [Units] menu.
1. Tap the [Home] icon to show the home screen and display mode settings.
2. Tap [Settings] to show the [Settings] menu.
3. Scroll the main menu, then tap [Initial Setup] to show the [Initial Setup] menu.
4. Referring to the tables on the following pages, set your equipment.
[Initial Setup] menu - [GPS POSITION]
Menu item
[Longitudinal (from
bow]
[Lateral (-Port)]
Menu item
[Boat Length]
[Own Ship MMSI]
[Own Ship Name]
[Size of Static Icon]
[Depth Display]
[External Transducer
Draft]
[Keel Draft]
Menu item
[Engine & Tank Auto-
matic Setup]
[Engine & Tank Manual
Setup]
[Graphic Instruments
Setup]
Description
Referring to the figure on the
right, enter the GPS antenna
positioning bow-stern
(Longitudinal) and
port-starboard (Lateral)
position from the origin.
Description
Set the length of your boat.
Set the MMSI for your boat (used for fleet tracking function only).
Set the name for your boat (used for fleet tracking function only).
Set the size of static (such as own ship)
icons.
Select the start point for depth measure-
ment.
Set the draft of external transducer. See
the instructions below for how to set the
draft of other types of transducers.
For internal/network transducers, set
the draft from Home screen→[Set-
tings]→[Sounder]→[Transducer Draft].
For multi-beam sonars, set the draft
from Home screen→[Settings]→[Multi-
beam Sonar]→[Initial Setup]→[External
Transducer Draft].
Set the keel draft.
Engine & Tank, Instruments Setup
Description
See "[Initial Setup] menu - [Engine & Tank Automatic Setup]" on page 3-
12.
See "[Initial Setup] menu - [Engine & Tank Automatic Setup]" on page 3-
12.
See "[Initial Setup] menu - [GRAPHIC INSTRUMENTS
SETUP]" on page 3-11.
3. HOW TO SET UP THE EQUIPMENT
Options (setting range)
0 (m) to 999 (m)
-99 (m) to +99 (m)
Origin
Origin
Port-side is negative,
Starboard-side is positive.
Options (setting range)
0 (m) to 999 (m)
50 to 150
[Under Keel],
[Under Sea Level]
0.0 (m) to 99.9 (m)
0.0 (m) to 99.9 (m
Options (setting range)
3-7
Advertisement
Table of Contents
