Wiring; Interface Connections (Rear Of Unit) - Furuno TZT9F Installation Manual

2.

WIRING

2.1

Interface Connections (Rear of Unit)

Composite connector Composite connector
USB USB
MULTI cable MULTI cable
1
* : Lay the ground wire away from this unit's power cable.
2
* : Use of the extension cable (C332 10M) may cause the following problems:
- Reduced detection ability
- Wrong ACCU-FISH™ information (fish length smaller than actual length,
fewer fish detections, error in individual fish detection).
- Wrong speed data
- No TD-ID recognition
Rear of TZT9F Rear of TZT9F
Ground wire
(Local supply,
1
IV-8sq.)*
TO: Ship's ground
NMEA2000 NMEA2000
NETWORK NETWORK
Power Cable Power Cable
MJ-A3SPF0019-035C MJ-A3SPF0019-035C
3.5 m, supplied) 3.5 m, supplied)
*2 *2
Transducer Cable Transducer Cable
TO: Transducer
2-1