Initial Settings; Data Sentence Description - Furuno RD-30 Installation Manual

INITIAL SETTINGS

2.
This equipment can input and output navigation data to external
equipment in IEC 61162-1 (NMEA 0183) format. Input data is output as
raw data. For output setting, refer to the operator's manual of the
equipment.
2.1

Data Sentence Description

APB: Autopilot sentence data
BWC: Range and bearing to waypoint (great circle navigation)
BWR: Range and bearing to waypoint (rhumb line)
COG: Course over ground
DBK: Depth
DBS: Depth
DBT:
DPT:
GGA: GPS position fixing condition (time of fix, latitude, longitude,
GLC: Geographic position Loran-C
GLL:
GTD: Loran-C time difference
HDG: Heading, deviation and variation
HDM: Heading, magnetic north
HDT:
MDA: Wind direction and speed
MTW: Water temperature
MWV: Wind direction and speed
RMB: Generic navigational information (cross track error, steering
RMC: Generic navigational information (UTC time, latitude, longitude,
ROT: Rate of Turn
VBW: Water speed and ground speeds
VDR: Tidal current direction and current speed
VHW: Water speed and heading
VTG: Actual track and ground speeds
VWR: Relative wind direction and speed
VWT: Actual wind direction and speed
XTE:
ZDA: UTC time (day, month, year)
Depth below transducer
Depth
receiving condition, number of satellites used, DOP)
Latitude and longitude
Heading true
direction, starting waypoint no., destination waypoint no., latitude
and longitude of starting waypoint, latitude and longitude of
destination waypoint, range and bearing to waypoint, range and
bearing from present position to destination waypoint, velocity to
destination, arrival alarm)
ground speed, true course, day, month, year)
Course error amount and direction to steer
7