Table of Contents
Advertisement
3. HOW TO SET UP THE EQUIPMENT
[GRAPHIC INSTRUMENT SETUP] - [PROPULSION ENGINE] or [OTHER ENGINE]
Menu Item
[Max. RPM]
[Red Zone Oil Pressure]
[Max. Oil Pressure]
[Min. Temperature]
[Red Zone Temperature]
Menu item
[Add Default CZone
Pages]
[CZone DIP Switch
Settings]
Menu item
[Reset Instrument Pag-
es]
[Reset Default Set-
tings]
[Initial Setup] menu - [Engine & Tank Automatic Setup]
The TZT9F will automatically detect engines and tanks connected to the same net-
work.This is the recommended method for setting up engines and tanks.
[Initial Setup] menu - [Engine & Tank Manual Setup]
The manual set up method should only be used if the automatic setup did not correctly
detect your engines or tanks.
3-12
Description
Set the maximum rpm of your engine to
show on the RPM display.
Set the starting value for the red zone area
of the oil pressure meter.
Set the maximum oil pressure of your
engine.
Set the minimum temperature for your
engine.
Set the starting value for the red zone area
of the engine temperature indicator.
CZone
Create, edit CZone pages.
Set this unit's DIP switches. For the serviceman. Do not change the set-
tings.
Resets all instrument pages to default.
Resets applicable settings to default.
Options (setting range)
1 (rpm) to 20,000 (rpm)
0 (psi) to 143 (psi)
1 (psi) to 144 (psi)
0.00°C to 99.00°C
0.01°C to 999.00°C
Description
Description
[OK], [Cancel]
[OK], [Cancel]
Advertisement
Table of Contents
