Riello Hi, Comfort 100 Installer And User Manual page 2

Dear Customer,
Thank you for choosing the Hi, Comfort T100 control. This control device for heating
(and cooling) systems and boilers is easily installed and, if used correctly, offers bet-
ter quality comfort as well as energy savings.
This thermostat has been designed to support a maximum of 2 A at 30 VDC or 0.25
A at 230 VAC (specifications for internal relay to switch the boiler "room thermostat"
connection).
9
If the device is installed by a third party, please ensure that this manual is given
to the end user.
9
These instructions must be kept by the user.
COMPLIANCE
The Hi, Comfort T100 remote control panel complies with:
− Electromagnetic Compatibility Directive 2014/30/EU
− Low Voltage Directive 2014/35/EU
At the end of its life, the product should be not be disposed of as solid
urban waste, but rather it should be handed over to a differentiated
waste collection centre.
The following symbols are used in some parts of the manual:
9
CAUTION= for tasks which require particular care and suitable prepa-
ration.
0
FORBIDDEN = for tasks which MUST NOT be performed.
RIELLO GROUP
Via Ing Pilade Riello,
7-37045 Legnago (VR),
Italy
2