Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Riello RiCLOUD NA Series
Summary of Contents for Riello RiCLOUD NA Series
- Page 1 hermosTaT...
-
Page 2: Basic Information
BASIC INFORMATION Desired room temperature (up to 3 settings) Room temperature • Heat or Cool request (if ON/OFF connected) • Flame presence (if OTBus connected) Thermostat status icons: − Heat (ON/OFF Central heating) − Cool (ON/OFF Cooling) − Heat/Cool (ON/OFF automatically heat/cool) Values increase button Press once the MODE button to scroll the below... - Page 3 Heat The RF receiver will be assigned heating RICLOUD DIRECT FUNCTIONS management Function RF pairing - MODE button (9) Move the RF receiver to pairing mode, by There are two different types of pairing available: 1) Single direction (SIn): to pair the thermostat with a RF pressing and holding the transparent LED receiver as zone receiver.
-
Page 4: Working Modes
WARNING: If an error code persists, contact a qualified press the MODE button (9) several times to select the relay type. service agency to perform service on your appliance. Nor will be assigned to the receiver Wifibox and/or RF Do not attempt to service your appliance yourself. This boiler. -
Page 5: Advanced Function
thermostat is OFF (when ON/OFF connec- tion) or boiler is OFF (stand by) (when OT- Bus connection). DOMESTIC HOT WATER (DHW MODE) boiler is in domestic hot water only (only available when OTBus connec- tion and if the protocol allows this). thermostat working only in ventilation mode. - Page 6 Heating Heat. mode Cooling Cool. enable Heat/Cool. this mode device, depending room temperature value and the temperature bands set for heating cooling, will activate cooling rather than heating. In particular: if Tamb> Tx, cool (x = 2, 3), a FUNCTIONS/ICONS AUTO cooling request will be triggered If Tamb <Tx, heat (x = 1, 2 or...
- Page 7 HOW TO SET THE DESIRED ROOM TEMPERATURE DEFAULT VALUE T2 COOL 81 °F/27.2 °C Press PROG to enter the values of programming menu T3 COLL 75 °F/23.8 °C Press the button (3) or the button (1) to scroll up to T1 - T2 - T3 heat T3 HEAT 70 °F/21 °C...
-
Page 8: Working Mode
WORKING MODE Icon/Mode Description The thermostat will follow the time switch program that’s been set or selected via the PROGRAMMING MENU and the selected temperatures on the PROGRAMMING MENU – T1-T2-T3 (the values can also be selected individually with the (8) and (10) buttons when the thermostat is following the relevant set temperature). -
Page 9: Programming Menu
PROGRAMMING MENU select the desired icon Icon Description Sub-menu Sets the HOURS and DAY. Press the PROG button (2) again to enter the sub-menu and With the (3) and (1) buttons select the desired proceed to set the parameter. The hours value (hours, minutes or days) and with the (8) and and day are automatically set if WiFi Box is... - Page 10 Icon Description Sub-menu Sets the desired room temperature levels: With (3) and (1) buttons select the desired value T1 - T2 - T3. (T1, T2 or T3) and with the (8) and (10) buttons Press the PROG button (2) to enter the sub- select the values.
- Page 11 SET HEATING AND COOLING TIME BANDS From HOME screen, press PROG button to open the Press the PROG button to set. user menu. Press the (3) or (1) button to select the day or Press the (3) or (1) button to select the field period of the week to be changed.
- Page 12 Days Display Saturday Monday Sunday Tuesday Press the PROG button (2) to confirm the day or period of the week to be changed. Press the (3) or (1) button to select the time Wednesday segment to be changed. Press the MODE button (9) to select the desired room setpoint temperature (T1, T2, T3).
-
Page 13: Error Codes
ERROR CODES Alarms Main alarms and description Semi-automatic system filling function Thermostat temperature sensor damaged (non-repairable) Radio frequency communication missing OTBus communication missing Hardware damaged – not repairable A01-A10 Ignition failure A02-A20 High limit thermostat intervention Alarm final flue thermostat, limit A03-A30 thermostat, air pressure switch and/or premix fan... - Page 14 ONLY QUALIFIED PERSONEL PASSWORD TECHNICAL MENU AND EXPERTISE SETTINGS Parameter Description Icon Alarm history. Available only when Set the minimum limit temperature 21 ALL OTBus is connected. 01 t0 (frost protection for ON/OFF and DHW/ SUMMER mode). Boiler parameter settings (TSP). 22 tSP Available only when OTBus is Set max and minimum set point in...
- Page 16 Ricloud is a RIELLO GROUP brand Via Ing. Pilade Riello, 7 37045 Legnago - Italy Further information and request assistance at the following website:...