Boiler And Hi, Comfort T100 Alarms - Riello Hi, Comfort 100 Installer And User Manual

4.2 Boiler and
Hi, Comfort T100 alarms
The alarm is shown in alternation with
the room temperature detected by the
Hi, Comfort T100 on the display.
SET
PROG
RESET
SET
PROG
RESET
Alarm
SET
rIE
PROG
RESET
Semi-automatic fill function.
SET
PROG
Err
RESET
Hi, Comfort T100 room temper-
ature sensor damaged. Cannot
be repaired.
Description
78
In case of a boiler alarm (available with
OTBus connection between the WiFi Box
and the boiler, if provided for by the
OTBus protocol), the alarm can be reset
by pressing the BACK/RESET button
alarm A99, reset from the boiler).
9
The Hi, Comfort T100 alarms (rIE,
E82, E83) and the temporary boiler
alarms may be automatically reset
once the fault has been resolved.
Solution
− See "3.6.3 SEMI-AUTOMATIC
FILLING function" to page
51
− Check the system pres-
ESC
sure.
MODE
− Should you not be able to
remove the alarm, please
contact the Authorised Ser-
vice Centre.
ESC
− Replace
MODE
Hi, Comfort T100.
− Contact the Authorised Ser-
vice Centre.
(for
the