Display - Riello Hi, Comfort 100 Installer And User Manual

3.2

Display

7
6
5
4
3
SET
PROG
2
1
RESET
1 Date and time
2 Operating mode
3 Time program for heating/DHW
4 Room setpoint temperature desired, in relation to the heating program. If
the summer/domestic hot water mode is set, it displays the domestic hot water
setpoint temperature (available with OTBus connection between the WiFi Box
and the boiler or the RF receiver and the boiler or the Hi, Comfort T100 and the
boiler, if provided for by the OTBus protocol).
5 Batteries running low
6 Room temperature read by the Hi, Comfort T100 thermostat
7 Flame detection (available with OTBus connection between the WiFi Box
and the boiler or the RF receiver and the boiler or the Hi, Comfort T100 and
the boiler, if provided for by the OTBus protocol) or heating request if the
Hi, Comfort T100 system is in ON/OFF mode
8 Unit of measure (°C/°F)
9 Heating or DHW mode active
10 Radio frequency communication active with the WiFi Box or with the boiler
RF receiver
11 Cooling mode active
45
8
9
10
11
ESC
MODE