Alarms And Operating Statuses; Led Notification Lights For The Wifi Box And Boiler Rf Receiver - Riello Hi, Comfort 100 Installer And User Manual

4

ALARMS AND OPERATING STATUSES

4.1 LED notification lights for
the WiFi Box and boiler
RF receiver **
LED LED
Green Red
F05
F1
ON
ON F01
F05
F1
ON
ON (OT-
Bus)
F05 F05
F05
F05 F05
F1 F1
* Only for WiFi Box
** The notification lights on Boiler RF
receivers may differ with respect
to the table.
LED
ON = remains on
F05 = quick flash (every 0.5 sec-
onds)
F1 = slow flash (every 1 second)
Status
Relay = closed
(only for ON/OFF
connections)
Relay = open
(only for ON/OFF
connections)
OTBus connection
= OK
(for OTBus con-
nection)
Boiler alarm
(only for OTBus
connection)
Network or RF
error
WPS mode active
– Wait for WPS
signal from the
router*
WPS signal ac-
cepted*
Smartlink mode
active*
Encoded RF mode
active
Operation of the prismatic dome clear
LED button on the WiFi Box and boiler
RF receiver
WiFi Box
In case of a boiler alarm (available with
OTBus connection between the WiFi Box
and the boiler or the RF receiver and the
boiler or the Hi, Comfort T100 and the
boiler, if provided for by the OTBus pro-
tocol), the alarm can be reset by press-
ing the prismatic dome clear LED button
(A) (for alarm A99, reset from the boiler).
9
The reset performed by the boiler
RF receiver could differ from what
has been described.
With an ON/OFF connection, the re-
lay can be activated or deactivated by
pressing the prismatic dome clear LED
button (A).
77
A