Riello Hi, Comfort 100 Installer And User Manual page 41

Attach the WiFi Box to the boiler casing
using the magnet on the back;
Connect the USB connector on the pre-
viously connected cable to the WiFi Box
OUTPUTS/BOILER output;
USB
Power the WiFi Box via the relevant ca-
ble and power adapter provided.
Resetting the OTBus connection au-
to-configuration function
The Hi, Comfort T100 is configured to
function in ON/OFF mode.
Should it be connected to an OTBus
communication bus (wired or wireless/
radio frequency), the Hi, Comfort T100
auto-configures to the "Boiler remote
control" operating mode.
To restore the thermostat to its original
operating mode (ON/OFF), remove and
then reinsert the batteries.
9
The alarm E82 may be triggered by
a change of operating mode from
OTBus to ON/OFF or vice versa.
41