Vatech EzScan-i User Manual page 75

Electrostatic ± 8 kV
discharge /Contact
(ESD) IEC ± 2 kV, ± 4
61000-4-2 kV, ± 8 kV,
± 15 kV /air
Electrical fast ± 2 kV for
transient/ power
burst IEC supply lines
61000-4-4 ± 1 kV for
input/outpu
t lines
Surge IEC ± 0.5 kV, ± 1
61000- kV line(s) to
4-5 line(s)
± 0.5 kV, ± 1
kV, ± 2 kV
line(s) to
earth
Voltage dips, <5% UT
short (>95% dip in
interruptions UT) for
and 0,5 cycle
voltage 40% UT
variations on (60% dip in
power supply UT) for 5
input cycles 70 %
lines IEC UT (30% dip
61000-4-11 in UT) for
25 cycles
<5% UT
(>95% dip in
UT) for 5 s
Power 30 A/m
frequency
(50/60 Hz)
magnetic
field IEC
61000-4-8
Radiated RF Table 9 in
IEC 61000-4-3 IEC-60601-
1-2 2014
± 8 kV Surface should be wood,
/Contact concrete, or ceramic tile. If floors
± 2 kV, ± 4 are covered
kV, ± 8 kV, ± with synthetic material, the
15 kV /air relative humidity should be at
least 30%.
± 2 kV for Mains power quality should be
power that of a typical professional
supply lines healthcare facility environment.
± 1 kV for
input/outpu
t lines
± 0.5 kV, ± 1 Mains power quality should be
kV line(s) to that of a typical professional
line(s) healthcare facility environment.
± 0.5 kV, ± 1
kV, ± 2 kV
line(s) to
earth
<5% UT Mains power quality should be
(>95% dip in that
UT) for of a typical professional
0,5 cycle healthcare facility environment.
40% UT
(60% dip in
UT) for 5
cycles 70 %
UT (30% dip
in UT) for
25 cycles
<5% UT
(>95% dip in
UT) for 5 s
30 A/m Power frequency magnetic fields
should be at levels characteristic
of a
location in a typical professional
healthcare facility environment.
Table 9 in Portable and mobile RF
IEC-60601- communications equipment
1-2 2014 should be used no closer to any
Page 75