Thermo Scientific iCAP 7000 Series Manual page 19

iCAP Customer Familiarisation Manual
Screw the other end of the fitting tube into
the vacuum valve connector on the iCAP:
Attach the vacuum pump waste tubing to
the waste out connector on the iCAP, and
insert the other end into the waste
container:
Screw the autosampler probe valve fitting
into port 2 on the valve head:
Attach the sample loop into ports 1 and 4
on the valve head (this is the same as the
loop provided in the Field Service Test Kit):
Page 19 of 72
This document is part numbered 849940090071 Version 1.02