Appendix A: Editing Text Using The Built-In Programmer; A.1: Characters Used For Editing Text; A.2: Edit Name Example - Honeywell SILENT KNIGHT 6700 Manual

Appendix A: Editing Text Using the Built-In Programmer

This section contains the tables of programmable characters that may be used for the device, module, site, template, group, and zone names.
T9 style editing is used.
A.1 Characters Used for Editing Text
Table A.1 lists the available characters and their associated numeric designator. When programming, do the following.
1. Use the up or down arrow key to scroll to the mode you want to select.
2. Press the number shown in Table A.1 until the character you want to select is shown.
3. Press the left and right arrow key to move the cursor, and press ENTER to accept.
A.2 Edit Name Example
1. Press the up or down arrow key to select the upper case letters mode, Press 2 until "F" appears.
2. Press the up or down arrow key to change the mode to lower case letters, Press 3 until "i" appears.
3. Press 6 until "r" appears.
4. Press 2 until "e" appears.
5. Press 0 to space, then continue to the next word using the same process.
6. Press ENTER to accept.
NOTE: After three seconds of no change, the system will automatically accept the letter. Also, if you press the next number, the system will
automatically accept previous choice.
left/right: position
up/down: mode
6700 Manual — P/N LS10148-001SK-E:F 8/29/2022
Lower Case Letters
abc 1 def
mno 5 pqr
yz 9 Spc
Upper Case Letters
ABC 1 DEF
MNO 5 PQR
YZ 9 Spc
Numbers and Special Characters
[ ]
1 1 2 ( )
5 ' " 5 6 ? !
9 = - 9 0
Table A.1 Character Table
<Module Name>
Fire Door
_ _ _ _ _ _ _ _ _ _ _
1[abc] 2[def] 3[ghi]
4[jkl] 5[mno] 6[pqr]
Figure A.1 Edit Name Example
2 ghi 3 jkl
6 stu 7 vwx
0
2 GHI 3 JKL
6 STU 7 VWX
0
2 3 . , 3 4 : ;
6 7 ' / 7 8 – +
0 * & @ * # $
Enter: Accept
Fire Door
_ _ _ _ _ _ _ _ _ _ _
7[stu] 8[vwx] 9[yz ]
0[Spc]
4
8
4
8
4
8
#
119