FLUEING OPTION: MASONRY
Vertical Colinear flexi flues with Duravent cowl - 850FLEX and 850CLFLEX
High wind areas
If located in a windy areas, then a DV high wind vertical cowl protection kit (RDB992) is recommended. It is
designed to wrap around the vertical flue cowl to reduce wind entering the flue and causing flame disturbances.
Refer page 17 for more information.
Rinnai
Masonry vertical flexi flue kit 5.5 m DV
850FLEX
For installations in a masonry fireplace. Extends
out to 5.5 m. If longer flueing is required then
the colinear flexi flue extension kit needs to be
ordered.
Kit includes:
•
aluminium colinear roof cowl DV
•
chimney plate 455 x 455 mm
•
intake flexi Ø75 mm (LHS)
•
exhaust flexi Ø100 mm (RHS)
•
2 x Ø75 mm flue clamps stainless steel
•
2 x Ø100 mm flue clamps stainless steel
Masonry vertical flexi flue ext kit 2.5 m
850CLFLEX
When flueing needs to extend beyond 5.5 m.
Kit includes:
•
intake flexi Ø75 mm (LHS)
•
exhaust flexi Ø100 mm (RHS)
•
2 x joiners
•
2 x 75 mm flue clamps stainless steel
•
2 x 100 mm flue clamps stainless steel
14
SS850 IM