Replacement Of The Cylinder / Engine Lifting; Replacement Of The Spring Of The Lift Lever Manual - Stiga PARK 120 2016 Workshop Manual

Edition Workshop Manual
2016 PARK 120 - PARK 220
8.6

Replacement of the cylinder / engine lifting

Remove the cutting deck guard.
8.7

Replacement of the spring of the lift lever manual

8.3.1.
A
B
A
B
C B A
8 Mower Decks
1. Disconnect the plug from the socket on the
machine.
2. Remove the shaft-stop washers (A).
3. Extract the pins (B) and remove the drive unit.
To reassemble the various parts, repeat the
operations in reverse order.
1. Move the lever to the low position.
2. Unscrew the knob (A).
3. Extract the washer (B) and the spring (C).
4. Replace the spring and reassemble all the
components in reverse order.
Chapter Page
73