Stiga PARK 120 2016 Workshop Manual page 13

Edition Workshop Manual Chapter Page
2016 PARK 120 - PARK 220 1 General instructions 13
Spark plug
Remove the spark plug and clean or replace it as required. Also see the manual provided
by the engine manufacturer.
Transmission
Check for any abnormal noises.
Exhaust system
Check that there are no cracks, leakage or other types of damage. Check the hook up
devices. Also see the manual provided by the engine manufacturer.
Electrical system
Check there are no damaged cables, contacts or other devices. Check that all cables are
securely fastened to the frame using the relative cable ties. Check that none of the cables
rub against the frame as this could lead to damaged cables and short circuits. Check the
tightness of the battery terminals. 7.
Check controls
Check that all the controls function properly and that there is no jamming or excessive
play. Adjust if necessary. 6.
Power take-off
Check that the magnetic clutch engages rotation of the accessory in the preset time and
that it does not slip during operation at normal load. Replace the clutch if necessary.
Check that the PTO belt engages rotation of the accessory in the preset time and that it
does not slip during operation at normal load. Adjust if necessary.
Check that the PTO brake (if present) stops any rotation within a specific time. Adjust if
necessary.
The stopping time must never exceed 3 seconds.