Stiga PARK 120 2016 Workshop Manual page 18

Edition Workshop Manual
2016 PARK 120 - PARK 220
Removing the controls
F
E
G
B
C
D
I H
2 Frame and Covers
1. Remove the drive pedal, two screws (B).
2. Remove the parking brake pedal, screw (C).
Also remove the plastic knob (D) by pulling it
straight up.
3. Remove the lift pedal, screw (E). Also remove
the plastic knob (F) by pulling it straight up.
4. Remove the ignition switch nut (G). Use a 22
mm wrench to not damage the panel.
5. Remove the plastic knob (H) to the throttle
control, pull the knob straight up. Then remove
the throttle control, two screws (I).
Chapter Page
18