Stiga PARK 120 2016 Workshop Manual page 19

Edition Workshop Manual
2016 PARK 120 - PARK 220
J
Removal of the cover under the seat
B (6x)
C
6. Remove the fruits from the switches (J) by
operating from under the covering;
NOTE: the switch levers remain attached to the
casing. 7.4.3.
1. Remove the cover (A);
A
NOTE: operate with great care to avoid breaking
the tabs on the cover.
The locking tabs are at the top and bottom, the
two side ones are guide tabs.
2. Remove the six screws (B) under plate that
the seat was mounted on, then lift off the cover
(C).and extract it from the seat plate;
Chapter
2 Frame and Covers
Page
19