Description - Stiga PARK 120 2016 Workshop Manual

Edition Workshop Manual Chapter Page
2016 PARK 120 - PARK 220 5 Belts 34
5.2

Description

A. B. C. D.
work equipment belt Work equipment belt Work equipment Transmission belt
(belongs to the work clutch belt
equipment)
Front Back
1. 3. 5. 7. 9.
Pulley at the work Pulley double Pulley (double) Transmission Drive pulley at the
equipment pulley motor shaft
2. 4. 6. 8. 10.
Tension pulley Tension pulley Tension pulley Tension pulley Drive pulley at the
motor shaft
Belt A
The belt A belongs to the operating equipment and is connected to the machine by means
of a double front pulley (3). The belt is kept tensioned by the tensioning pulley (2) installed
on a spring-loaded tensioning arm.
Belt B
Belt B is dedicated to transmission from the articulated point to the double front pulley
which provides power to the operating equipment. The belt is kept tensioned by the
tensioning pulley (4) installed on a spring-loaded lever.
Belt C
Belt C transmits power to belt C and performs the function of PTO clutch. The belt is kept
tensioned by the tensioning pulley (6) installed on a spring-loaded lever.
Belt D
Belt D is for transmitting power from the engine to the transmission which transforms it into
a suitable power ratio for the drive shaft. The belt is kept tensioned by the tensioning pulley
(8) installed on a spring-loaded lever.