Replacement Of The Cylinder / Engine Lifting; Replacement Of The Spring Of The Lift Lever Manual - Stiga PARK 300 M Workshop Manual

Edition Workshop Manual
PARK 300 M - PARK 300
2022
8.6

Replacement of the cylinder / engine lifting

Remove the cutting deck guard.
8.7

Replacement of the spring of the lift lever manual

8.3.1.
A
B
A
B
C B A
8 Mower Decks
1. Disconnect the plug from the socket on the
machine.
2. Remove the shaft-stop washers (A).
3. Extract the pins (B) and remove the drive unit.
To reassemble the various parts, repeat the
operations in reverse order.
1. Move the lever to the low position.
2. Unscrew the knob (A).
3. Extract the washer (B) and the spring (C).
4. Replace the spring and reassemble all the
components in reverse order.
Chapter Page
73