Stiga PARK 120 2016 Workshop Manual page 37

Edition Workshop Manual
2016 PARK 120 - PARK 220
15
17
5
16
10
C
6. Cut the tie which holds the cable to the clutch.
7. Disconnect the connector (15) from the clutch
cable.
8. Remove the clutch stopper (16) by unscrewing
the two screws (17).
9. Remove the belt from the double pulley (5).
10. Remove the belt (C) from the pulley (10) on
the drive shaft and slip the belt out from the
rear.
Chapter
5 Belts
Page
37