Stiga PARK 120 2016 Workshop Manual page 30

Edition Workshop Manual
2016 PARK 120 - PARK 220
4.4.2 Oil change
To change/top up the transmission fluid must remove the transmission (
instructions provided by the manufacturer.
4.5 Transmission removal
Transmission disassembly
1. Remove the HST cable.
2. Remove the brake cable.
3. Remove the belt "D".
4. Lift the machine from the rear side just enough so that the front wheels do not touch the
ground. Keep it lifted using a jack or strong wooden planks.
Check that the machine is supported effectively and safely.
A
To reassemble the various parts, repeat the operations in reverse order.
4.6 Changing engine oil
Change engine oil for the first time after 5 hours of operation, and subsequently after every
50 hours of operation or once a season.
For instructions on how to change the engine oil
see the "INSTRUCTION MANUAL".
turer and
4.6.1 Checking the engine oil level
For instructions on how to check the engine oil level see the "INSTRUCTION MANUAL".
6.3.1
6.4.1.
5.2.2.
B (4x)
Warning!
5. Remove the rear wheels (A).
6. Unscrew the 4 screws (4) which hold the
transmission in place.
A
please refer to the instructions provided by the manufac-
Chapter
4 Hydraulic system
4.5)
and refer to the
Page
30