Display Options - Siemens HiPath 3000 User Manual

Nur für den internen Gebrauch
5.5.2

Display Options

Under the Display mode tab you can activate/deactivate the following options:
Display
> Phone always on top
The optiClient phone user interface always remains in the foreground.
> Move phone to top on incoming call
If the user interface is not set up to always be on top (i.e. in the foreground), you can
configure the user interface here to have it brought to the foreground on receiving incoming
calls.
The option to move the optiClient office to the top under Windows 98SE / 2000
>
/ XP depends on the currently running application, which may prevent this from
occurring (see also information on setting PC parameters in the section Working
with the Administration Tool).
> Maximize phone on incoming call
If this option is enabled, the user interface is restored from its minimised state on the
taskbar and displayed in the foreground on receiving an incoming call.
> Hide phone on minimized status
The optiClient phone is always reduced to the system tray; it can also be reduced to the
taskbar if the corresponding option is enabled.
> Minimize phone after a period of time
Activate this option if the user interface should be minimized after a specified amount of
time. This should be entered as a number of minutes. Use the Hide phone on minimized
status option to decide whether the user interface is to be minimised in the system tray or
on the taskbar.
The parameters in other tabs can now be changed. To save the settings and to exit the dialog
click on OK.
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual
optiClient office User Interface
Option Settings for the optiClient office
42bof.fm
5-15