Introduction And Important Notes - Siemens HiPath 3000 User Manual

1einl.fm

Introduction and Important Notes

1 Introduction and Important Notes
This documentation describes the installation, user configuration and use of the
>
optiClient 130 V4.0. In order to make this documentation easier to read, the terms
optiClient 130 (for the overall product) and optiClient phone or optiClient office
as well as optiClient easyCom are used for the respective user interfaces.
General Information
The optiClient 130 is a telephony application that can be run on a PC. It permits phone calls to
be conducted via a LAN (Voice over IP) in conjunction with the HiPath 3000/5000 V4.0 commu-
nication system.
The HG 1500 board of the HiPath 3000/5000 V4.0 enables the connection with optiClient 130
via a LAN connection. The maximum number of clients that can be connected are as follows:
HiPath 3000/5000 V4.0 V3.0 or earlier
Office Pro
●
Office Com
●
Office Point
●
1-2
A maximum of 3 HG1500
boards with 48 clients per
HG1500
(of which 16 stations can es-
tablish a connection simulta-
neously)
A maximum of 2 HG1500
boards with 48 clients each
(of which 8 stations can es-
tablish a connection simulta-
neously)
A maximum of 1 HG1500
board with 48 clients
(of which 8 stations can es-
tablish a connection simulta-
neously)
Nur für den internen Gebrauch
V3.0 or later
A maximum of 8 HG1500 boards
with 96 clients each for a maximum
of 500 clients
(outside the LAN, 16 stations can
simultaneously set up a connection
in each HG1500).
A maximum of 4 HG1500 boards
with 48 clients each
(outside the LAN, 8 stations can si-
multaneously set up a connection in
each HG1500).
A maximum of 2 HG1500 boards
with 48 clients each
(outside the LAN, 8 stations can si-
multaneously set up a connection in
each HG1500).
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual