Safety Information - Siemens HiPath 3000 User Manual

1einl.fm
Introduction and Important Notes

Safety Information

1.3 Safety Information
Only service personnel and authorized specialists are permitted to work on the installation.
Observe the following information:
Read through all the information on the equipment carefully and follow all the safety guide-
●
lines. Make sure that you also note down the emergency numbers.
Always contact your manager before starting any work where the necessary safety precau-
●
tions do not appear to be in place.
Types of safety information
This manual uses three types of safety information:
Danger
7
Danger symbols call attention to a situation that could cause serious injury or death
to a person.
Warning:
7
Warning symbols call attention to a situation that could cause serious injury to a per-
son.
Caution
7
Hazards that can cause damage to the hardware and software and even destroy it.
Further symbols for defining the source of danger in greater detail
1 5
Electricity Weight:
* Electrostatically sensitive devices
1. These symbols are normally not used in the manual. They only explain the symbols that may appear on the
systems.
1-6
3 0
Heat Fire
Nur für den internen Gebrauch
1
:
6 4
Chemicals ESD*
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual
2
Laser