Manual Update Check For The Opticlient Phone - Siemens HiPath 3000 User Manual

Nur für den internen Gebrauch
4.4

Manual Update Check for the optiClient phone

In addition to the automatic update function, which checks for new update versions of the op-
tiClient 130 about every 15 minutes, the optiClient 130 can also be updated manually.
Step Procedure
1
The optiClient phone menu appears.
●
2 Select Update...
The optiClient 130 checks if a new version of the program is available on the
●
update server for installation.
No new program version available...
3 If no new program version is available on the update server, a corresponding
●
message appears. If no update server has been configured, an error message
appears. The update server is set up in the user configuration.
New program version available...
3 If a new program version is available on the update server, the following dialog
●
appears:
4 Choose one of the available options:
On immediate installation, the optiClient is first closed, and the update version
●
is then installed. The optiClient phone must then be restarted manually.
If you delay the update until the next logon, the periodic update will be deferred
●
to the next time you log on and will no longer performed during the current ses-
sion.
If you choose the final option, the update version will not be installed. The peri-
●
odic update check, if configured, is deactivated.
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual
Click the menu key.
optiClient phone User Interface
Manual Update Check for the optiClient phone
4bof.fm
4-11