Intended Use; Telephone Type; Speakerphone Quality And Display Legibility; Single-Line Telephone/Multi-Line Telephone - Siemens OpenStage 60 T Operating Instructions Manual

General information

Intended use

The OpenStage phone was developed as a device for speech transmis-
sion and should be placed on the desk. Any other use is regarded as unau-
thorized.

Telephone type

The identification details (exact product designation and serial number) of
your telephone can be found on the nameplate on the underside of the
base unit. Specific details concerning your communications platform can
be obtained from your service technician.
Please have this information ready when you contact our service depart-
ment regarding faults or problems with the product.

Speakerphone quality and display legibility

•
•

Single-line telephone/multi-line telephone

Your phone is "multiline-enabled". This means that your service personnel
can configure multiple lines on your phone, which is not the case with sin-
gle-line phones. Each line is assigned an individual phone number which
you can use to make and receive calls.
The programmable sensor keys function as line keys on multi-line phones
page 111.
When using a multi-line phone to make and receive calls, certain particu-
lars must be taken into account

Executive-secretary functions

The executive-secretary configuration is a special case. This is a multi-line
telephone with special features (e.g. "Call transfer to exec", "Call pickup"
and "Representative"), configured especially for executive-secretary use
page 127 ff.
12
To ensure good speakerphone quality, the area in front of the telephone
(front right) should be kept clear.
The optimum handsfree distance is 20 in. (50 cm).
Proceed as follows to optimize display legibility:
– Turn the phone to tilt the display. This ensures you have a frontal view
of the display while eliminating light reflexes.
page 111 ff.