Audio Parameters - Siemens HiPath 3000 User Manual

3benkonf.fm
First Steps and User Configuration
Logging on
3.4.2.2

Audio parameters

1. Switch to the Audio tab in the extended options dialog.
Display
2. Enter the following parameters:
Parameters
Handset
Mixer
Audio playback
Audio recording
3-16
Meaning
Under Handset select the handset for the optiClient. All devices/
drivers installed are offered in the drop-down list.
Components located on the PC/sound card for the Mixer.
If this designation is identical to the designation of the Audio
playback and Audio recording components, you must only carry
out the selection here. The designation will be automatically as-
signed to the other components.
If the names for Mixer, Audio playback, and Audio recording are
not identical, they must be selected individually. Please ensure
that components from the same sound card are selected.
Components located on the PC/sound card for the Audio play-
back. Ensure you enter a component from the same sound card
in all three fields.
Components located on the PC/sound card for recording. En-
sure you enter a component from the same sound card in all
three fields.
Nur für den internen Gebrauch
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual