Configuring Parameters For Quality Of Service - Siemens HiPath 3000 User Manual

Nur für den internen Gebrauch
3.2.4

Configuring Parameters for Quality of Service

Proceed as follows to configure parameters for Quality of Service:
1. Activate the Quality of Service tab in the Administration Tool.
Display
2. Enter the global Windows settings for the current PC under Global settings for this PC.
Use the Enable QoS under Windows 2000 option to activate or deactivate the option to
●
use Quality of Service (QoS) under Windows 2000. This option must be activated for opti-
mized voice quality which is also primarily dependent on the infrastructure in the network
(see also section
This option is irrelevant for operation under Windows XP because QoS is always available
under Windows XP.
Click Defaults to display the default values for HiPath networks. The values are displayed
●
in the input fields.
Click Save to save your entries immediately and directly to the Windows registry.
●
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual
Configuring/installing Quality of
First Steps and User Configuration
Working with the Administration Tool
Service).
3benkonf.fm
3-9