Siemens HiPath 3000 User Manual page 50

Nur für den internen Gebrauch
Parameters
Play back sounds only
via PC speaker (not via
sound card)
Play back sounds via
sound card and PC
speaker
To ensure proper functionality, it is important to note that if you are using the op-
>
tiPoint handset, you should select USB Audio Device as sound card compo-
nents for Mixer, Audio playback, and Audio recording.
Activating the options under Sounds is only useful if the PC has an internal
>
speaker available.
3. You can now configure further parameters or click on OK. This returns you to the Logon
dialog.
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual
Meaning
If the option is activated, sounds are output only via the PC
speaker.
If this option is activated on a PC running under Windows 98SE,
sounds are not signalled by a modulated tone but, depending on
the operating system, by a default system beep.
This option can only be activated if the option Play back sounds
via PC speaker is not activated.
When this option is activated, all sounds (e.g. alert characters for
inbound calls) are played back via the sound card and the PC
speaker. Tones, e.g. busy signals, are only played back via the
sound card.
First Steps and User Configuration
3benkonf.fm
Logging on
3-17